 |  | SmartPort SP-S10 Download
This is the current firmware file for the SmartPort SP-S10 serial controller.
The file is stored in iNED Loadable format for upload through the iNED Browser.
Any SmartPort customer is entitled to this download at no charge.
Installation Instructions
- Download the firmware file:
SPS10.iNL (3/1/2002; 60KB)
- In the iNED Browser, select the SmartPort unit you wish to update.
- From the "Tools" button in the Browser, select the choice labeled
"Upload file" (the name of the SmartPort is also shown on this choice).
The "iNED File Uploader" window appears.
- Browse to the location of the file you downloaded and select it.
Click the "Open" button.
- The firmware uploads automatically.
When the upload is complete, the SmartPort unit restarts automatically,
and after a few seconds is available for use with the new firmware.
- If you have additional SmartPort units to update, repeat the steps above as necessary.
If you encounter any problems with this procedure, contact IRIS Technologies Technical Support
for further guidance.
|
|  | 
Do I need this update?
If you are presently using your SmartPort without difficulties, it is not necessary
to update your firmware.
|
|
