Signal Detection Switch Download

This is the current set of firmware files for the iNED Signal Detection Switch (SDS). The files are stored in iNED Loadable file format for upload through the iNED Browser. Any iNED SDS customer is entitled to these downloads at no charge.

Installation Instructions

1. Download the firmware file(s) you will need:
   CPU card: SDS.iNL (5/14/2003, 21KB)
   Video 2x1 switch card: SDSv2x1.iNL (5/1/2003, 2KB)
   Video 4x1 switch card: SDSv4x1.iNL (5/1/2003, 2KB)
   Video DA card: SDSvDA.iNL (5/1/2003, 2KB)
   Audio 2x1 switch card: SDSa2x1.iNL (5/1/2003, 2KB)
   Audio 4x1 switch card: SDSa4x1.iNL (5/1/2003, 2KB)
   Audio DA card: SDSaDA.iNL (5/1/2003, 2KB)
   
2. In the iNED Browser, select the SDS unit you wish to update.
3. From the "Tools" button in the Browser, select the choice labeled "Upload file" (the name of the SDS is also shown on this choice). The "iNED File Uploader" window appears.
4. Browse to the location of the file you downloaded and select it. Click the "Open" button.
5. The firmware file uploads automatically. When the upload is complete, the SDS unit restarts automatically, and after a few seconds is available to use with the new firmware.
6. If you have more firmware files to install, or additional SDS units to update, repeat the steps above as necessary.

If you encounter any problems with this procedure, contact IRIS Technologies Technical Support for further guidance.